Operators Guide
DigiBook 450
34
rel. 2.00-B
Orange light blinking
Auxiliaries turned on or off in
Orange light off
Auxiliaries turned off
Green light on
Machine on cycle
Green light blinking
Machine not on cycle
Green light off
Machine not ready
10.2
ELECTRICAL CONNECTION
Make sure that the cable of the Perfect Binder is connect-
ed to electricity network with the specified features.
Turn on the main switch located on the left side of the
machine, turn right to achieve the position 1= (ON).
10.3
PNEUMATIC CONNECTION
Connect the pneumatic power source following the procedure:
Connect the hose 0.39in (10mm external diameter) to the quick
of the binder.
To disconnect the hose of the machine, it is necessary to rotate
the blue part of the sleeve. With this procedure you will flush the
air from the machine. When you have finished, it will be possible
to pull out the sleeve pushing upwards the blue part and pulling
out the sleeve downwards. The sleeve has a seal system that once
pulled out does not allow air passage
