Morgana AutoCreaser Pro 385 Instruction Manual Download Page 45

Page: 45 / 83

Roller Gap 1

Roller 0

Roller 1

Roller 2

Roller 3

Roller Gap 2

Roller Gap 3

Roller Gap Adjustment

This sub-menu allows the user to

adjust the distance between the

rollers manually.

This feature should only be used if

the default settings are not working

properly.

See “folding” section in this manual

for more information on roller gaps.

Roller Gap Adjustment

Raise the Delivery Module

When switching the fold on, this

screen will remind the user to take

the Bypass Tray off and raise the

Delivery Module.

Press the green checkmark button

after having completed the operation.

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920

Summary of Contents for AutoCreaser Pro 385




















































































Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands

Morgana AutoCreaser Pro 385, Instruction Manual

Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands