Disposal/Ecology
Packaging material and appliance are made from recyclable
materials. Seperation of the remaining waste materials into
different types facilitates the recycling of valuable raw materi-
als. When the appliance is to be no longer used please dispose
of it in the proper manner.
This Symbol on the product indicates that it should not be
disposed in the normal houshold waste. Please take it to
a recycling point for electrical and electronic appliances
to be recycled in a proper manner.
Please obtain information on disposal from your local
authority.
LED Lightbulb and Remote Control
For this product a Multicolour LED Lightbulb (Mod. 20-02-01)
with radio remote control (Mod. 20-02-02) is supplied. Please
refer to the related manuals.
Mod. 20-02-02 Mod. 20-02-01
Alice XL LED (Mod. 29-02-01-LED)
Assembly and Bulb Installation/Replacement
210930 ML Alic
e XL DE-EN V1.2
©2021 M
or
ee Germany GmbH
Bedienungsanleitung (DE)/Instruction Manual (EN)
Mod. 29-02-01/Mod. 29-02-01-LED
ALICE XL/ALICE XL LED
Design by Moree in Germany
•
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen und sorgfältig aufbewahren.
•
Please read the instruction manual fully before using the product. Keep the manual for the entire
life of the product.
Distribution
Original Packaging
The device can be safely transported in the origi-
nal packaging. If insufficient protective packaging is
used, the customer is liable for any damages during
transportation.
Please keep the original packaging and use it, if possible,
in case of warranty or return of the equipment.
Refer to our website for the latest information about our
products.
www.moree.de
Moree Germany GmbH
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
Designed by Moree in Germany
© 2014 - Design Patented.
Products are subject to change.
CAUTION! DISCONNECT THE
PRODUCT FROM THE MAINS
BEFORE INSTALLATION.
MAX. 60 W
ALICE XL LED
ALICE XL
Unscrew plastic nut, place shade on to the body. Secure by
screwing the two screws, then rescrew the plastic nut back on.
To secure lampshade in a desired position use the tighting
knobs on the brackets of the shade.
GERMANY
Declaration of Manufacturer
Hereby, Moree Germany GmbH declares that the device
is in compliance with the essential requirements and
other relevant regulations of the applicable Directives.
The declaration of conformity can be requested at the
following address: [email protected].
