PIR MS – Multi Sensor
Hardware: V3.0
Firmware: V4.4
1.
GENERAL FEATURES:
Reading points:
24; (20)
i
nfrared memories, (1) temperature
reading, (1) brightness and (1) motion sensor, and (1) tamper;
Control Points:
8 outputs infrared;
Control:
Via MD BUS;
Applications:
Reading temperature and luminosity, infrared
interfacing and reading sensors PIR and Tamper;
2.
GENERAL SPECIFICATIONS:
Voltage:
12VDC;
Consumption:
35mA @ 12VDC;
Storage Temperature:
-10 ºC to 60 ºC;
Operating Temperature:
10 ºC to 50 ºC;
Maximum humidity:
80% non-condensing;
Reading Temperature:
0 ºC to 50 ºC;
Brightness:
10 levels;
Entries infrared:
20 keys remote control are recognized as
inputs Mordomus;
Infrared outputs:
8 Learning Keys to remote data output
(command devices infrared).
Physical Specifications:
Dimensions:
110mm X 65mm X 40mm;
Level of Protection:
IP20, for indoor use.
Directives:
-Electromagnetic Compatibility Directive / EMC
Directive 2004/108/EC
3.
C
OMPATIBILITY:
PCCWd Compatibility:
Firmware 3.4 or higher version V3.31
with BUS Adapter;
Mordomus Software Compatibility:
Mordomus Software
v2015.2 or higher.
4.
SECURITY:
Before making any connections, please read these
instructions.
5.
CONNECTIONS:
And specification section of conductors:
Circuit Bus:
CAT6 Cable F/UTP shielded, twisted;
Power Circuit:
CAT6 Cable F/UTP shielded, twisted;
Table of Connections
:
Number
Function
1
+12VDC
2
GND
3
Contact PIR (normally closed)
4
Contact PIR (normally closed)
5
Tamper (normally closed)
6
Tamper (normally closed)
7
MD Bus RX (a)
8
MD Bus RX (b)
Manual: PIRMS-1549-EN
Pág.
1
/
3
