Mopar Navus, Owner'S Manual

Page: 44 / 76

38
P
LANNING AND
M
ODIFYING
R
OUTES
> M
ODIFYING A
R
OUTE
Adding Avoidances
You can add areas and certain road types you want avoid on your
route. For example, if you encounter roads that are highly congested,
you can add that area to your Avoid List.
To add an avoidance to your route:
1. Press and hold the MENU key for two seconds to view the Active
Route menu. Select Routing Setup . The Routing tab opens.
2. Select Avoidance . The
Avoidance page appears.
3. Select the road type you want
to avoid. The Navus avoids all
roads types that have a check
mark in the Avoid box.
To avoid a road:
1. Press and hold the MENU key for two seconds to view the Active
Route menu. Select Routing Setup . The Routing tab opens.
2. Select
Avoidance
. The Avoidance page appears.
3. Select Custom Avoids . The
Avoid List page opens. To add an
avoidance, select Add Avoid .
4. Select Avoid Road to select a street
to avoid on your routes. A map
appears, enabling you to mark a “start
point” on a road.
5. Touch the beginning point of the road you want to avoid and
touch the check mark in the right corner. A blue push pin
marks the start point.
6. Touch the end of the road
area you want to avoid and
touch the check mark .