TSM
TSM34P Quick Setup Guide
Requirements:
You will need these items to setup the TSM34P:
•
A 24-70VDC power supply
•
A 12-48VDC auxiliary power supply (if needed)
• A small flat blade screwdriver for tightening the
connectors (included)
• A PC running Microsoft Windows XP, or Windows7/8/10
with an RS-232 serial communication port, otherwise a
USB to RS-232 serial port converter is needed.
• Software: Step-Servo Quick Tuner
• a programming cable (included)
Step 1
Step 2
Install Software
• Download the "Step-Servo Quick Tuner" from MOONS' website.
• Install the “Step-Servo Quick Tuner” software application.
• Connect the drive to the PC using the programming cable. (See "Communication Wiring" below)
• Choose the correct COM port. (See "Choosing the Right COM Port" below)
• Run the software application.
• Apply power to the drive.
• The software will communicate with the drive and display the model & firmware version.
• Follow the steps in the “Step-Servo Quick Tuner” to set up.
Connect the Power Supply
• Connect the main power supply “+” terminal to the drive ”+” terminal & the power supply “-” terminal to the drive “-”
terminal using 16 to 20-gauge wire.
• Connect the auxiliary power supply “+” terminal to the drive ”AUX +” terminal & the power supply “-” terminal to
the drive “AUX -” terminal
Be careful not to reverse the wires. Reversing the connection may open the internal fuse and void the warranty
• If a regulated power supply is being used, there may be a problem with regeneration that can be solved with the
use of a MOONS' RC880 Regeneration Clamp. See MOONS' website or the TSM34P Hardware Manual for more
information.
NOTE: When using the optional auxiliary power supply, the main power must be applied prior to the auxiliary power.
• Only qualified personnel should assemble,
install, operate or maintain this equipment.
• Read all available documentation before
assembly and operation.
• It is vital to ensure that all system
components are connected to earth ground.
• This product contains electrostatically
sensitive components that can be damaged
by incorrect handling.
2016/02/06
RC880
TSM
V
-
V
+
AUX-
Vin
+
-
to Earth
Ground
Main Power Supply
24-70VDC
AUX Power Supply
12-48VDC
AUX+
V
-
V
+
V
-
V
+
Vout
+
-
Safety Instructions:
