13
Rev. 1.0
0012072012
TSM24P User Manual
+86-400-820-9661
3.2 Connecting the TSM24P Communications
The TSM24P comes with a cable that will provide the interface to an RS-232 port through a DB9
style connector.
3.2.1 Connecting to the PC using RS-232
Locate the TSM24P within 2.5 meters of the PC. Plug the DB9 connector of the communication
cable that came with the drive into the serial port of the PC. Plug the small end into the crimp style
connector on the TSM24P . Secure the cable to the PC with the screws on the DB9 connector.
Note: If the PC does not have an RS-232 serial port, a USB Serial Converter will be needed.
You can contact MOONS’ to buy a USB to RS-232 converter.
The RS-232 circuitry does not have any extra electrical “hardening” and care should be taken
when connecting to the RS-232 port as hot plugging could result in circuit failure.
GND
TX
+5V
RX
