97
Rev. 1.1
2018/04
400-820-9661
M2DC Series Hardware Manual
7.3.5 Software Configuration for Analog Velocity Mode
The M Servo Suite software easily configures the drive and motor, and optimizes the tuning parameters.
Step
Operation
Description
Step
1
Configure motor
Choose your motor model. Refer to Section 2.3 for motor details.
Step
2
Choose control mode
In Control Mode, choose “velocity” for Velocity Mode
Step
3
Control mode configuration
Select preferred velocity analog type. Refer to Section 7.3 for analog
velocity mode and Section 7.6 for command velocity mode.
Step
4
Set analog signal
Set analog input functions in Input & Output. Refer to Section 4.8.3 for
CN2 connections, Section 7.3 for velocity mode, and Section 7.1 for
general function settings.
