6
Rev. 1.0
7/31/2019
SSDC-R/C/IP Hardware Manual
2 Getting Started
The following items are needed:
• A 12-70VDC power supply, see the section below entitled “Choose a Power Supply” for helping to choose the right one.
• A compatible StepSERVO motor, please see the section below entitled “Recommended Motor”
• A small flat blade screwdriver for tightening the connectors screw(included)
• A PC running Microsoft Windows XP/Vista/7/8/10 (Using serial communication port.
• Install the StepSERVO Quick Tuner software
(download from Applied Motion Products website: www.applied-motion.com )
• A power cable(included)
• Communiation cables are Included,they can be used to do the daisy-chain connectionas well as configure the drive.
• Optional extended motor cable(Sold separately)
• Optional extended encoder cable(Sold separately)
• Optional extended I/O cable(Sold separately)
