Moog SmartMotor SM34165MT-IP, Ethernet Ip Manual

Page: 77 / 160

Ethernet Link Object (0xF6)
Moog Animatics Class 6 EtherNet/IP Guide, Rev. B
Page 77 of 160
Ethernet Link Object (0xF6)
The following tables provide the Class and Identity Attributes, and the Supported Services for
the Ethernet Link Object (0xF6).
Class Attributes
Attrib
ID
Access
Rule
Name
Data
Type
Description
Semantics
1 Get Revision UINT Revision of this object.
Default Value: 3
The minimum value
= 1.
Use ≥2 if instance
attribute 6 is imple-
mented.
Use 3 if any instance
attributes 7-10 are
implemented. Max
value = 3.
2 Get Max Instance UINT Maximum instance num-
ber of this object.
Default Value: 2 The largest instance
number of a created
object at this class
hierarchy level.
3 Get Number of
Instances UINT Number of object
instances currently cre-
ated at this class level of
the device.
Default Value: 2 The number of
object instances at
this class hierarchy
level.
6 Get Maximum
ID Number Class
Attributes UINT The attribute ID number of
the last class attribute of
the class definition imple-
mented in the device.
7 Get Maximum
ID Number
Instance Attrib-
utes UINT The attribute ID number of
the last instance attribute
of the class definition
implemented in the
device.
Instance Attributes
Attrib
ID
Access
Rule
Name
Data
Type
Description Semantics
1 Get Interface Speed UINT Interface speed currently
in use.
Default Value: 100 Speed in Mbps (e.g.,
0, 10, 100, 1000,
etc.)
2 Get Interface Flags DWORD Interface status flags.
Default Value: 0x20
Bit map of interface
flags. See Attribute
2: Interface Flags.