Automatic inertia detection
Once the safety notice window has been confirmed, the wizard is activated to
determine the mass inertia. When it has been successfully determined, a green tick
(check-mark) is displayed.
See also Section "Automatic inertia detection" on page 111.
Enhanced >>
When you click the “Enhanced >>" button, the wizard provides you with support in
setting up the current, torque, speed and position controllers. If further optimization is
required, the controller buttons route you to more detailed screens.
MOOG
ID No.: CB40859-001 Date: 11/2020
MSD Servo Drive - Device Help
23
3 Initial commissioning
3.3 Motor
Image 3.5: “Initial Commissioning - Motor data and control settings” screen
l
You can click on the "
Select motor data set
" to select a motor from Moog .
l
If you want to use a different motor, you can configure it by clicking on the
"
Manual motor settings
" button. For details see Section "Motor configuration
l
If you need to configure the temperature and current monitoring mechanism,
click on the "
Motor protection
" button. For details see Section "Motor
l
To configure a motor brake, click on the "
Motor brake
" button. For details see
