11.4 Error display
There are a number of ways of displaying an error message. An error message is
indicated on the display of the servo drive (display D1/D2) or via the Moog
D
RIVE
A
DMINISTRATOR
. It provides a user-friendly readout in the "Device status"
window.
11.4.1 Servo drive display
The display on the servo drive shows the various device states and possible error
messages. Two 7-segment displays are available for this purpose. To display an
error number and an error, "ER" for Error flashes, then the error number, and then
the number of the error location.
Example: ER ►16 ►01
Display
readout
Function
Attention – error message
Errors marked with a dot on the display (D1/D2) can only be
reset when the cause of the fault has been eliminated.
Maximum speed exceeded
Table 11.5: Servo drive error display
MOOG
ID
No.:
CB40859-001
Date:
02/2018
MSD
Servo
Drive -
Device
Help
2
6
5
11 Alarm & warnings
Display
readout
Function
Speed tracking error above threshold value
Table 11.5: Servo drive error display (continue)
