⑤
Jog speeds
Fast jog
Slow jog
⑥
Synchronized motion
Master configuration
Electronic gearing
Electronic cam plate
⑦
Details
Additional settings for closed-loop control and reference
Legend to “Motion profile” dialog box (continue
)
MOOG
ID
No.:
CB40859-001
Date:
02/2018
MSD Servo Drive - Device Help
162
8 Motion profile
8.2 S
caling
/ units
As soon as you select “Standardization / units”, the Standardization Wizard used to
select a standardization profile will appear.
Fig. 8.2: “Standardization profile selection” screen
The wizard helps ensure that the application’s physical data will match the servo
drive data. If you are using the "Standard / CiA 402" or "SERCOS" profile, the wizard
will fully support the scaling definition process. If you use “custom” scaling instead,
the wizard will close, as this type of configuration can only be set up directly in the
parameter editor.
ID
Index Name
Unit Description
283
0
MPRO_FG_Type
Factor group: Type selection; DS402(0), Sercos
(1), USER(2)
Table 8.1: Parameter ""
