Moog MSD G393-004, Operation Manual

Page: 43 / 90

moog
MSD Servo Drive DC-AC Operation Manual
[ ]
Commissioning
43
Id.-No.: CA97554-001 Date: 06/2012
to
gl
os
sar
y
to t
ab
le o
f c
on
te
nt
s
4.4.3 Parameter menu (PA)
On the Parameters menu the following functions are available::
• Reset device settings to factory defaults
• Data set handling with MMC card
NOTES:
• It is only possible to operate the MMC if the power stage is not active.
• Accessing the MMC may as long as 2 minutes. During this time both deci-
mal points flash.
Menu level Param-
eter
Value
range
Meaning Explanation
1 2
PA
Pd - 00..99 Parameter
download
*)
100 data sets (0..99) can be read from
the path: \PARA\TRANSFER\PDSxx.dmd
(xx = 00.99) by the MMC.
Pu - 00..99 Parameter
upload
*)
100 data sets (0..99) can be stored
on the MMC in the directory \PARA\
TRANSFER\PDSxx.dmd . The directory is
generated automatically. Existing data
sets may be overwritten.
Pr - - Parameter reset Reset device settings to factory defaults.
Pc - - Parameter clear Clear all data sets on the MMC card.
*) It is only possible to operate the MMC if the power stage is
not
active. Accessing the MMC may as long as 2 minutes.
Table 4.7 Parameter menu
Error numbers
A failed user action is indicated by an error message. The message consists of an alter-
nating display of “Er” and the error number.
NOTE: The error messages displayed during user input should not be confused
with drive error messages. For detailed information on the error codes and on
error management refer to the “MSD Servo Drive Application Manual”.
Error number Meaning
00 File System No Error
01 File System Any file system error
02 File System command rejected
03 File System function parameter invalid
04 File System create file error
05 File System open file error
06
MMC create directory failed
07
MMC mounting error
08 MMC unmounting error
09 MMC using not allowed with current technology option card
10 MMC error uninstall X12 card
11 MMC not inserted
12 MMC mounting, create node
13 MMC not supported by hardware (not NSP 257)
14
MMC device in control enabled
15
MMC load parameter dataset to device failed
16 MMC save parameter dataset failed
17 Parameter reset to factory settings failed
18 Parameter write access failed
19 Save parameter data set non volatile failed
20 Not all parameters written
21 Error while reset to factory settings
Table 4.8 Error numbers