Moog Claravox Centennial, User Manual

Page: 51 / 77

50
Rear Panel Connections
Power Connection
Refer to Figure 33
+12VDC
Plug only the power supply that came with
your Claravox Centennial into this connector.
Connect the other end to a properly wired and
grounded wall outlet.
NOTE: This was mentioned earlier in this manu-
al, but it is worth repeating: because the player's
entire body interacts with the circuitry at the heart
of the theremin, a properly grounded connection
is required for stable operation. However, when
using a well-grounded (earthed) Claravox Centen-
nial with a well-grounded (earthed) amplifier, it is
possible to introduce a ground loop. In this case, it
may be necessary to use a ground-lifting device on
either Claravox Centennial or the amplifier – but
not both – to eliminate the ground loop.
Figure 33