Moog Claravox Centennial, User Manual

Page: 50 / 77

49
Rear Panel Connections
Audio Outputs
Refer to Figure 32
Of the three audio outputs found on Claravox
Centennial, two are found here on the Rear Pan-
el (
TUNER OUT
,
MAIN OUT
). The third au-
dio output, the (
HEADPHONE OUT
) output,
is located on the Front Panel.
Tuner Out
This output provides and direct feed of the au-
dio signal at constant volume (tapped directly
after the heterodyne output in
TRADITION-
AL
mode and the OSC 1 output in
MODERN
mode. With a tuner connected, this provides a
strong signal for the tuner to grab onto and is
especially convenient when changing the Root
Note and Scale, checking tuning, and other
tasks while the audience hears silence.
TUNER OUT (TS):
Mono Signal; Line Level;
pre-VCA
Main Out
This is the main instrument output. The signal
available here will be sent to an amplifier, mon-
itoring system, or recording console. No signal
is sent from this output when the Front Panel
OUTPUT
switch is set to the
MUTE
position.
TIP: The TUNER OUT can be used for “pitch pre-
view” by connecting a set of earbuds equipped
with a volume control, or in-ear monitors equipped
with a gain control.
Figure 32