Installation Verification
Installation Verification
To verify the installation, navigate to the C:\Programs folder. You should see the following dir-
ectory structure:
Accessing the SMI Software Interface
The SmartMotor Interface software (SMI software) communicates with a single or series of
SmartMotors from a Windows-based PC and gives you the capability to control and monitor
the status of the motors. The SMI software also allows you to write programs and download
them into the SmartMotor’s long-term memory.
NOTE:
Every SmartMotor has an ASCII interpreter built in. Therefore, it is not
necessary to use the SMI software to operate a SmartMotor.
To open the SMI software, double-click the SmartMotor Interface shortcut on the Windows
desktop.
SmartMotor Interface Shortcut
Optionally, to open the SMI software from the Microsoft Windows Start menu, select:
Start > All Programs > Animatics > SMI2 > SmartMotor Interface
The SMI software interface opens, as shown in the following figure.
Moog Animatics Class 6 SmartMotor™ Installation & Startup Guide, Rev. 03 - PRELIMINARY
Page 26 of 58
Summary of Contents for Class 6 SmartMotor
Page 1: ...Installation Startup Guide Class 6 SmartMotor Technology...
Page 12: ......
Page 20: ......
Page 57: ......
