Unpacking and Verifying Your Shipment
Unpacking and Verifying Your Shipment
Your Moog Animatics SmartMotor and accessories are carefully assembled, tested, inspected
and packed at the factory.
When you receive your shipment, you should immediately do the following:
l
Visually inspect all shipping containers for visible signs of shipping damage. If you see
damage, please notify your carrier and then contact Moog Animatics to report the prob-
lem.
l
Carefully unpack each component and verify the part number with your order. If there
are any differences or missing items, please contact Moog Animatics so that the ship-
ment can be corrected.
l
As you are unpacking the shipment, please keep all boxes and packing materials. These
may be needed for future storage or shipment of the equipment.
Installing the SMI Software
The SmartMotor Interface software (SMI software) provides a convenient user interface for
programming the SmartMotor. Before you can use the SMI software, it must be installed on a
Microsoft Windows PC.
The SMI software is distributed on CD-ROM and is also available as a download from the Moog
Animatics website. To download the latest version of the SMI software, use the following
address:
Then click the SMI Download button at the top of the page.
SMI Download Button
The installation package is downloaded to your system.
NOTE:
The SMI software requires Microsoft Windows XP or later.
Installation Procedure
To install the SMI software:
1. Double-click the executable package (.MSI) file to begin the installation. In some ver-
sions of Microsoft Windows, you may receive a security warning message about running
the file. You can ignore this message.
If this is a new installation, go to the next step.
Moog Animatics Class 6 SmartMotor™ Installation & Startup Guide, Rev. 03 - PRELIMINARY
Page 23 of 58
Summary of Contents for Class 6 SmartMotor
Page 1: ...Installation Startup Guide Class 6 SmartMotor Technology...
Page 12: ......
Page 20: ......
Page 57: ......
