Montageanleitung KTB /
Mounting Instructions KTB
13
®
5
Programming
(english)
1.
Accomplish the reset
– Switch-off the operating voltage 24V
– Simultaneously press button 5 and enable the operating voltage 24V
2.
Adjust the gear ratio
Version S (1.2 – 21 m/min.): i = 21.6 : 1
Version L (0.4 – 7.6 m/min.): i = 59.2 : 1
– Simultaneously press button 1 and 2 for 3 sec, the program mode is obtained
– Press eather button 5 or button 3 several times until GEA on the display appears
– Confirm with button 4
– Press button 5 and choose the ratio 21.6 or 59.2
– Confirm with button 4
– Press button 4 for 3 sec (quitting of the program mode)
3.
Adjust the belt speed
– Adjust max. speed, press button 5 for a few seconds
1
2
3
4
5
6
6a
6b
6c
