Monte Carlo Fan Company MC223, Owner'S Manual And Installation Manual

Page: 3 / 8

GENERAL INSTALLATON
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
Remove set screws from switch housing.
Keep screws.
Unplug and remove the switch housing
from fan.
Remove medallion from switch housing
by removing its set screw.
Thread lead wires from light fixture through
central hole in switch housing and then
install switch housing onto light fixture by
turning clockwise till tight. Place lock
washer and hex nut provided over lead wire
from light fixture and tighten securely with
the thread rod of light fixture.
Connect white wire from light fixture
with white wire from switch housing
and then connect black wire from light
fixture with blue wire from switch
housing.
Lift light fixture assembly up, connect
the plug from fan to the plug from
light kit assembly (switch housing).
Make sure the plugs are clasped
firmly.
Install light kit assembly (switch
housing) onto the fan with set screws
removed in step 2.
Remove nut and finial from light
fixture. Keep parts.
ON
OFF
ON
OFF
Blue
White
Black
White
Medallion
Switch housing
Light fixture
Nut
Finial
3
© 2013 Monte Carlo Fan Company
12/1/2013
1 2 3
4 5 6
7 8
9