Push glass up into fitter and hand
tighten the 3 screws to hold in place.
22
Locate blue and white wire from the fan
marked “For light kit”. Connect blue from fan
to black from light and white from fan to
white from light by pushing connectors
together.
Attach switch cap to fan by lining up
3 screw holes and twisting cap clock-
wise. Then tighen the 3 screws.
19
20
Install 2 x 13 watt (E27) based
fluorescent bulbs.(Bulbs Included)
21
Tighen keeper nut onto threaded
pipe from the light kit.
Install keeper nut over lead wires.
17
18
Install switch housing to light kit by
turning clockwise to tighten.
16
