background image

5

© 2015 Monte Carlo Fan Company

3/23/2015

12

13

14

15

16

17

Remove every other screws from yoke 

located on top of fan assembly. Keep 

screws.

Note

: Flush mount is not available with 

vaulted ceiling. 

Place canopy and rubber pad over lead 

wire and safety cable and align the larger 

holes in canopy and holes on rubber pad 

with the set screws on yoke. 

Reinstall the 3 set screws remove in step 

12. Tighten screws securely. 

To prepare the fan for wiring, hang fan 

onto mounting bracket by sliding the 

canopy over the mounting bracket hook 

(Use one of non-slotted holes on the 

rim of the canopy).

For Canadian installation and for USA fan 

and light kit combinations over 35 lbs, in 

both flush and downrod modes the safety 

cable must be installed into the house 

structure beams using 1.5” lag screws, 

washers and lock washers provided. Make 

sure that when the safety cable is fully 

extended the lead wires are longer than 

the cable and no stress is placed on the 

lead wires.

Note

: If Installing The Secondary Support 

Safety Cable in the U.S., Do Not Remove 
Knockouts In The Outlet Box.

 

Remove side covers from canopy 

exposing  4 holes.  2 closed holes and 2 

open “L” shape holes. 

Flush Mount Installation

Side cover

Rubber pad 

SAFETY CABLE INSTALLATION

Lag screw

Safety cable

Washer

Lock washer

Hook

Summary of Contents for 5TLR54 Series











Reviews: