3
1
2
3
4
5
6
© 2021 Monte Carlo Fan Collections
11/2021
ON
OFF
ON
OFF
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
Use AC 120V/60HZ power supply
only.
Before installing this fan make sure the
outlet box is properly installed to the
house structure. To reduce the risk of
fire, electric shock, or personal injury,
mount to outlet box or supporting system
acceptable for fan support.
(Mounting must support at least 35 lbs.)
Use metal outlet box suitable for fan
support and use only the screws provided
with the outlet box (must support 35
lbs). Before attaching fan to outlet box,
ensure the outlet box is securely fastened
by at least two points to a structural
ceiling member ( a loose box will cause
the fan to wobble).
Remove the 2 set screws corresponding
the round holes in the canopy and loosen
the other 2 set screws. Keep the screws.
Remove the mounting plate by turning
counterclockwise.
Place the decorative ring over the
canopy.
Install the mounting bracket onto the
outlet box.
Partially loosen the two screws on the
outlet box, attach the mounting bracket
onto the outlet box by sliding it over the
two screws as shown in the illustration.
Outlet box
Mounting plate
Motor assembly
Mounting plate
Decorative ring
Motor assembly
Summary of Contents for 3IKR44 Series
Page 10: ...Nov 2021...
