24
4.1 CONNECT CART TO IMPLEMENT
Risk of loss of control when transporting cart.
Remove all product from tank before transporting on roads. With empty tanks, maximum
speed for cart on roads is 30 mph.
Maximum speed for cart with full tank is 10 mph.
4.1.1 CONNECT CART (STANDARD CART WITH BALL HITCH)
1.
Install two 2
5/16
inch (30K) hitch balls on implement at 22"
center spacing. Tighten as recommended by manufacturer.
2.
Back implement up to cart.
3.
Lower adjustable hitch height as needed with jacks to
engage ball hitches.
4.
Install ½ x 4½ inch bolts (A) to fasten arms to ball hitches.
Tighten bolts to 57 lb/ft (77 Nm) of torque.
5.
Verify chain (B) is installed between two arms to keep arms
together if they disconnect from hitch.
6.
Wrap long chains (C) around frame as shown. Hook chain
and engage hook safety lock.
7.
Retract and remove jacks from cart.
4.1.2 CONNECT CART (STANDARD CART WITH KNUCKLE HITCH OR DRIFT ASSIST HITCH)
1.
Back implement up to cart.
2.
Place large bottom washers (A) over holes on hitch plate.
3.
Lower adjustable hitch height as needed with jacks to
engage 1⅜ inch knuckle bolts (B) through washers and
hitch plate holes.
4.
Install 1⅜ inch lock washers and nuts on bolts. Tighten to
559 lb/ft (758 Nm) of torque.
5.
Verify chain (C) is installed between two arms to keep arms
together if they disconnect from hitch.
6.
Wrap long chains around frame as shown. Hook chain and
engage hook safety lock.
7.
Retract and remove jacks from cart.
A
A
C
C
B
4. c
onnect
c
art
t
o
I
mplement