15
3. a
SSembly
3.1 CART ASSEMBLY OVERVIEW
Cart assembly procedures are about the same regardless of cart size. The exception is the track cart which has a different
a spindle style configuration.
3.2 CART SHIPPING CONFIGURATION
Standard Carts are shipped with the following components for assembly:
•
Center Frame
•
Spindle Assemblies (Left /Right)
•
Arms (2) - (Left /Right)
•
Wheels (2)
•
Adjustable Knuckle Hitches (2)
•
Hitch Balls (2-5/16 inch) (2)
•
Floating Saddles (4) (Dry fertilizer use only)
•
Jacks (2)
3.3 CART ASSEMBLY (STANDARD CARTS)
3.3.1 INSTALL AXLE SPACERS (IF EQUIPPED)
Note: If cart is not equipped with axle spacers, go to 3.3.2.
Prevent death or serious injury.
Center frame assembly weighs
approximately 750 lbs (340 kg).
Axle spacer weighs approximately 165 lbs
(75 kg).
Use adequate lifting and support devices.
1.
Raise and support center frame using adequate lifting and
support devices capable of supporting up to 10,000 lbs
(4536 kg) total assembly weight.
2.
Install axle spacer (A) to center frame (B) with ¾-10 x 2½
inch bolts and ¾ inch lock nuts. Tighten bolts to 317 lb/ft
(430 Nm) of torque.
B
A