1
SSVC-4.1 Single Input 4-Channel Speaker Selector with Volume Control
P/N 38159
Quick Install Guide
INTRODUCTION
The SSVC-4.1 Speaker Selector is a resistor-based, impedance matching speaker selector
used for connecting up to four pairs of 4-ohm or 8-ohm speakers, while maintaining a safe
impedance load for your amplifier or receiver. Each pair of speakers can be independently
turned on or off using push buttons on the front panel, with no need for worrying about
amplifier loading. Each zone features an independent volume control.
FEATURES
Connect and safely control multiple speaker pairs with a single amplifier
Automatic impedance protection circuitry
100 watts/channel continuous power handling capacity, 200 watts/channel peak
5-ohm minimum amplifier impedance with four 4-ohm speakers selected, 6-ohm
minimum with 8-ohm speakers
Individual zone on/off buttons and volume controls
Heavy-duty screw-type connectors supporting 12-18 AWG speaker wire
Isolated left/right circuit grounds provide safe connection for amplifiers with
floating grounds or bridged configurations
Accurate, noise-free switching
