1
SS-6 Premium 6-Channel Speaker Selector
P/N 38158
Quick Install Guide
INTRODUCTION
The SS-6 Speaker Selector is a resistor-based, impedance matching speaker selector used
for connecting up to six pairs of 4-ohm or 8-ohm speakers, while maintaining a safe
impedance load for your amplifier or receiver. Each pair of speakers can be independently
turned on or off using push buttons on the front panel, with no need for worrying about
amplifier loading.
FEATURES
Connect and safely control multiple speaker pairs with a single amplifier
Automatic impedance protection circuitry
100 watts RMS per channel power capacity
4.6-ohm minimum amplifier impedance with six 4-ohm speakers selected, 5.3-ohm
minimum with 8-ohm speakers
Supports 12-16 AWG speaker wire
Individual zone on/off buttons
Heavy-duty screw-type connectors
Isolated left/right circuit grounds provide safe connection for amplifiers with
floating grounds or bridged configurations
Accurate, noise-free switching
