18
Move Axis
1.
Perform the steps in the
Auto Home section above.
2.
On the Main Menu, rotate the Knob until the Prepare option is highlighted, then
press the Knob to enter the Prepare Menu.
3.
Rotate the Knob until the Move Axis option is highlighted, then press the Knob to
enter the Move Axis Menu.
4.
Rotate the Knob until the Move X, Move Y, Move Z, or Extruder option is
highlighted, then press the Knob to enter the Move X, Move Y, Move Z, or Move
Extruder Menu.
5.
Rotate the Knob until the Move 10mm, Move 1mm, or Move 0.1mm option is
highlighted, then press the Knob to move the selected axis by the indicated
amount.
