Monoprice MHD Sport 2.0 Wi-Fi 12570 User Manual Download

Page: 48 / 88

12. When you have no further

Delete

actions

to perform, repeatedly press the

Power/Mode

button to move the

highlight to the

Exit

menu icon.

13. Press the

Shutter

button to exit the

Setup

menu.

14. Press the

Power/Mode

button repeatedly until the

Exit

menu option is highlighted.

15. Press the

Shutter

button to exit

Set

mode.

Changing the OLED Display Orientation

You can change the orientation of the OLED (OSD) display so that
you can read it properly with the camera lens either facing towards
or away from you. Perform the following steps to change the
orientation of the display:

Power the camera ON.

Press the

Power/Mode

button

repeatedly until the Set mode is
displayed.

Press the

Shutter

button to enter the

Set

mode menu.

Press the

Power/Mode

button once to

move the highlight to the

More

entry.

Press the

Shutter

button to enter the

More

menu.

Press the

Shutter

button again to select

the

OSD

icon and enter the

Up/Down

menu.

Summary of Contents for MHD Sport 2.0 Wi-Fi 12570

























































































Search results

Summary of Contents for MHD Sport 2.0 Wi-Fi 12570

Reviews:

Related manuals for MHD Sport 2.0 Wi-Fi 12570

Brands by name

Popular brands

Monoprice MHD Sport 2.0 Wi-Fi 12570, User Manual

Search results

Summary of Contents for MHD Sport 2.0 Wi-Fi 12570

Reviews:

Related manuals for MHD Sport 2.0 Wi-Fi 12570

Brands by name

Popular brands