6
Side View
1.
HDMI IN/OUT: HDMI® connector
for connecting an HDMI video
source device to the transmitter
and an HDMI display to the
receiver.
2.
POWER: Micro USB connector for
attaching the included USB power
adapters using the included USB to
Micro USB cables.
3.
MULTIFUNCTION BUTTON: See the
MULTIFUNCTION BUTTON section for details.
LINK LED
The Link LEDs on the transmitter and receiver units have the following states:
Off: When the Link LED is off, the device is either powered off or is in Sleep
mode.
Slow Blink: When the Link LED on the transmitter blinks slowly, the transmitter is
in Scan mode, searching for a matching receiver. When the Link LED on the
receiver blinks slowly, the receiver is in Beacon mode, searching for a matching
transmitter.
Fast Blink: When the Link LED blinks rapidly, the transmitter and receiver have
accepted each other and established a network.
On: When the Link LED is on steadily, the transmitter and receiver have
established a valid audio/video connection and video should be visible on the
connected display.
