27
Change Extruder
1.
After installing a new nozzle, set the compensation value for the temperature of the
new nozzle, in the range 0 ~ 30 from the base value of 240. Note that the proper
offset value for each extruder is printed on the bag. The default nozzle type
installed on this printer is 0.4-240.
2.
After setting the compensation value, touch the Next button to display the Select
Extruder screen. Touch the extruder that you just installed, then touch Complete to
finish the process. The system will change the maximum extruder preheat value
based on the selected extruder, so it is important to select the exact model
extruder installed.
