9
2.
Remove the monitor from the box and place it face down with the foam
packaging on a table or floor, then remove the rear piece of foam
packaging.
3.
Press the Button on the back of the monitor, as shown in the image below,
then remove the Stand Plate.
4.
Attach the Stand Plate to the Stand Assembly using two K-Head Screws,
as shown in the image above.
5.
With the Stand Plate now part of the entire Stand Assembly, insert the
Stand Plate into the back of the monitor until it clicks into place. Ensure
that it is securely attached to the monitor.
6.
Remove the monitor with the attached Stand Assembly from the foam
packaging and place it on a flat, stable surface.
REMOVING THE STAND
Perform the following steps to remove the installed stand from the monitor.
1.
Place the front piece of the original foam packaging material on a table or
on the floor, then place the monitor face down inside the foam.
2.
Press the Button on the rear of the monitor to remove the Stand
Assembly.
