20
Transferring Resin to Storage
When you use resin, small portions can be unintentionally cured. For this reason, it is
recommended to not mix used resin and unused resin. The used resin can be filtered using
a fine mesh to remove any cured bits. For best results, store the resin in a black container
with a lid. The container should be stored in a dark, ventilated place to prevent curing
during storage.
Discarding Resin
Before discarding resin, it should be fully cured. The easiest way to cure the resin is to pour
it into a clear, disposable cup, then placing the cup in direct sunlight until the resin is fully
cured.
PRINTING TIPS
Check the Resin Vat and Printing Platform before printing to ensure they are clean.
After removing the model, cover the lid to prevent the remaining resin curing.
After printing is finished, store the remaining resin in another container or leave it in
the Resin Vat. The shelf life will be significantly shorter for used resin. Adding fresh
resin can increase the shelf life.
CREATION WORKSHOP
In addition to the Web UI and Web Slicer, the printer includes a full version of the Creation
Workshop slicing and control software, which you can use without a Wi-Fi® connection. To
use Creation Workshop, then insert the included microSD™ card into a card reader on your
computer. Execute the Creation Workshop program found in the Creation Workshop
directory on the microSD card.
