18
USING THE WEB SLICER
1.
Turn the printer on. Type the IP address in the upper left corner of the Main Menu
into your web browser's address bar, then press the Enter key.
2.
Click the Slicer entry in the upper left corner of the Main UI.
3.
Load an STL model file using the file browser. Alternatively, you can drag and drop
an STL file directly onto the interface.
4.
Use the controls in the Build Volume section to
change the size of the build area. This defaults to the
maximum print size for the printer and should rarely
need to be changed.
5.
Use the controls in the Transformations section to
rotate, mirror, or scale the model.
6.
Click the Slice button to begin slicing the model
7.
After slicing is finished, click the Download button to
download the finished GIF file to your computer.
Alternatively, click the Print button to send the file
directly to the printer.
8.
Copy the downloaded GIF file to the included microSD™ card. Alternatively, you can
upload the print file using the Web UI to save it to the microSD card inserted in the
printer using Wi-Fi®.