10
Print Menu
1.
ETA: Displays the estimated remaining print time.
2.
Print Phase: Displays either EXPOSURE or LIFT, indicating the action being currently
performed.
3.
LAYERS: Displays the number of layers printed and the total number of layers for
the model.
4.
BaseCureTime: Select this option to adjust the number of seconds to expose each
of first three layers. Use the top and bottom buttons to change the value. Press the
center button to save the changes.
5.
CureTime: Select this option to adjust the number of seconds to expose each layer
other than the three layers. Use the top and bottom buttons to change the value.
Press the center button to save the changes.
6.
RaiseDistance: Select this option to adjust the number of millimeters to raise the
platform between each layer. Use the top and bottom buttons to change the value.
Press the center button to save the changes.
7.
Pause: Select this option to pause printing. Select it again to resume printing. Note
that the printer will finish exposing the current layer before pausing.
8.
Height: Displays the printed height and total height of the model in millimeters.
9.
Cancel: Select this option to cancel the current print.
