45
Printing Window Type: Allows you to choose the Basic (default) print dialog or
the Expert dialog, with many more individual settings.
Quit: Click File > Quit or press ALT+F4 to exit FlashPrint. If there are any unsaved
changes to your project or model, you will be prompted to save the changes.
Edit Menu
The Edit Menu contains the following options.
Undo: Click Edit > Undo or press CTRL+Z to undo the last change. In most cases, you
can undo multiple changes, one at a time.
Redo: Click Edit > Redo or press CTRL+Y to redo the last change that was undone. In
most cases, you can redo multiple undos.
Empty Undo Stack: Click Edit > Empty Undo Stack to clear the software's memory of
recent undos. This has the same effect as saving and reloading the project or model
file.
Select All: Click Edit > Select All or press CTRL+A to select all models in the scene.
Duplicate: Click Edit > Duplicate or press CTRL+V to copy the selected model(s).
Delete: Click Edit > Delete or press the Del key to delete the selected model(s).
Auto Layout All: Click Edit > Auto Layout All to automatically arrange the model(s) on
the build platform. You will be prompted to set the distance between models,
which can be from 1.0 to 50.0 mm.
Mirror Model: Click Edit > Mirror Model to mirror the selected model(s) in the X, Y, or Z
planes.
Repair Models: Click Edit > Repair Models to correct any errors in the selected model(s).
Supports: Click Edit > Supports to enter Support Edit mode.
