14
PROGRAMMING AND CLEARING THE REMOTE
(Models 30451, 30452, and 30453 only)
Setting Programming
Simultaneously press the Up and Stop buttons on your remote control until the LED
stops flashing and illuminates steadily, indicating that the programming was
successful.
Clear Programming
Simultaneously press the Up and Stop buttons on your remote control until the LED
stops flashing and illuminates steadily, indicating that the programming is cleared.
Notes:
You must set the programming within 10 seconds of pressing the Up and Stop
buttons or the programming will fail.
Do not start programming while the screen is in motion.
When you program the system for a different remote control, the included remote
will no longer work until the programming is cleared.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to [email protected]. Check the website for
support times and links.
