10
FINE TUNING THE SOUND
1.
Start audio playback on one of your audio source devices.
2.
Carefully aim the tweeters on the two speakers toward your listening area.
3.
If the sound is too bright, slide the Environmental Equalizer switch to the - (minus)
position. If the sound is suppressed or muddy sounding, slide the Environmental
Equalizer switch to the + (plus) position.
4.
Once you are happy with the quality of sound, replace the magnetic grilles onto the
two speakers.
Congratulations, your new Bluetooth® ceiling speakers are installed, connected, and tuned
for the best possible sound quality!
TROUBLESHOOTING
Q1: The Bluetooth speaker cannot be found during the Bluetooth® pairing process.
A1: Check the LED on the master speaker to ensure that the speaker is powered on. Ensure
that the LED is flashing, indicating that it is in Bluetooth pairing mode. If not, press and
hold the RESET button for 5 seconds to reset the speaker and clear all previous
Bluetooth pairings.
Q2: The speaker fails to connect to the Bluetooth device.
A2: Ensure that your Bluetooth device is located as close as possible to the speaker. If your
Bluetooth device prompts for a password, type 0000 (four zeros).
Q3: The Bluetooth source device is connected to the speaker, but no sound can be heard.
A3: Verify that your device is playing audio. Ensure that your device is not muted. Increase
the volume level.
Summary of Contents for 24760
Page 5: ...PRODUCT OVERVIEW...