21
Advance Menu
Aspect Ratio: Allows you to set the aspect ratio of the image on screen. The available
options are Full, 16:9, 4:3, 5:4, and 1:1.
Over Scan: Improves the response time. The available options are On and Off.
Over Drive: Improves the response time. The available options are On and Off. When
enabled, the OD Gain is adjustable from 0-100.
DCR: Not used.
DDCCI: This function determines whether the DDC/CI commands are supported or not.
Unless using a legacy operating system or one that does not support DDC/CI, this
should remain On. The available options are On and Off.
Ultra Vivid: This is another form of edge enhancement to eliminate ghosting around text
on the screen. The available options are Off, L (Low), M (Medium), and H (High).
Input Menu
Because this monitor features only a single HDMI® input, this menu is not used.
Audio Menu
This monitor does not support audio, therefore this menu is not used.
Other Menu
Reset: Resets the OSD menu to the factory default values.
Menu Time: Sets the amount of time that the OSD menu will remain on screen without any
buttons being pressed. The adjustment range is 0 and 5-60 seconds.
OSD H Position: Sets the horizontal position of the OSD menu on screen. The adjustment
range is 0-100.
OSD V Position: Sets the vertical position of the OSD menu on screen. The adjustment
range is 0-100.
