46
Others Tab
•
Skin Layers Thickness (mm): This option determines the thickness of the top and
bottom skin layers.
•
Horizontal Expansion (mm): Thermoplastics tend to shrink when cooling. This option
allows you to fine tune the part size to offset shrinkage for prints that require
tighter tolerances.
•
Enable Print Cooling: When enabled, cooling air will be directed at the printed part.
•
Enable Draft Shield: When enabled, the printer will print a wall around the model to
prevent environmental breezes or drafts from affecting the cooling. This is typically
used when Enable Print Cooling is disabled for filament that needs a longer cooling
time, such as ABS.
•
Wall Line Count: This option determines the number of walls to print.
