42
Material Tab
•
Filament flow (%): Sets the flow rate of filament in the melting state. This is set
according to the type of filament being used. In general, the flow rate for PLA or
PLA Pro is 90 and the flow rate of ABS is 100.
•
Filament Diameter (mm): Sets the diameter of the filament being used. This printer
only supports 1.75mm diameter filament.
Travel Tab
•
Combing Mode: This option determines how the nozzle will move when not
printing. The Off option causes the nozzle to move the shortest distance between
the previous extrusion location and the new start location. The All option causes the
nozzle to move along anything it has already extruded. The No Skin option will
avoid the outer layers to move the nozzle to the new start location, which can
greatly improve print quality.
•
Start Layers at Same Position: This option changes the accuracy of the model in the
same plane. It is generally set by default.
•
Layer Start Position X (mm): This option allows you to change the X axis coordinates
of the position of the model layer.
