8
Main Panel
1.
LED Display: The LED display shows the time setting, charging status, and error
codes.
2.
Clean Button: When the vacuum is in Sleep mode, press the Clean button to put
it into Standby mode. When it is in Standby mode, press the button once to start
automatic cleaning. When in Standby mode, press and hold the button for about
3 seconds to put it in Sleep mode. When scheduling, press the button to confirm
the setting. When the vacuum is in charging mode, press the button to start
cleaning.
3.
Home Button: When in Scheduling mode, press the Home button to increase the
value. When in any other mode, except while cleaning is in progress, press it to
cause the vacuum to return to the Charging Station and begin charging.
4.
Spot Button: When in Scheduling mode, press the Spot button to decrease the
value. When in any other mode, except when cleaning is in progress, press it to
begin Spot cleaning.
5.
Clock Button: When in Standby mode, press the Clock button to enter
Scheduling mode. When in Scheduling mode, press it to exit Scheduling mode
and return to Standby mode.
6.
Edge Clean Button: When in any mode other than Scheduling mode or when
cleaning is in progress, press the Edge button to begin Edge cleaning mode.