6
CHARGING YOUR MOBILE DEVICE
Perform the following steps to charge a mobile device using this Power Bank:
1.
Plug one end of the included micro USB charging cable into the charging input port on your mobile device.
Note: If your device does not use a micro USB connection for charging, use the cable that came with your
device instead.
2.
Plug the other end of the charging cable into the
USB Output
port on the Power Bank.
3.
Press the
Power
button to begin charging. The
LED Power Level Indicators
will illuminate to show the current
charge level of the Power Bank. As the Power Bank's charge is consumed, the LEDs will turn off one by one to
indicate the decreased charge level, as shown in the table below:
Note: If the charge level falls below 5%, immediately cease charging your mobile devices and fully recharge
the Power Bank before resuming charging of your mobile devices.
4.
When your device is fully charged, unplug the charging cable from the Power Bank, and then from your mobile
device. Press the
Power
button to turn the Power Bank off.
Charge Indicators
Charge Level
≤
5%
5% - 25%
25% - 50%
50% - 75%
75% - 100%
= Off
= On
= Flashing
