5
CHARGING THE POWER BANK
The Power Bank is charged by plugging it into any USB power source, such as:
•
a wall charger
•
a computer's USB port
•
another Power Bank
Perform the following steps to charge the Power Bank:
1.
Plug the micro USB connector on the included charging cable into the
Micro USB Input
port on the Power
Bank.
2.
Plug the other end of the cable into a USB power source. The
LED Power Level Indicators
will blink to indicate
that the Power Bank is being charged. The number of fully illuminated LEDs indicates the current charge level,
as shown in the following table:
3.
When all the LEDs are fully illuminated, unplug the USB charging cable from the power source, and then unplug
it from the Power Bank. The Power Bank is now fully charged and ready to power your mobile devices!
Charge Indicators
Charge Level
0 - 25%
25% - 50%
50% - 75%
75% - 99%
100%
= On
= Flashing
