Monomachine SFX-6, User Manual

Page: 49 / 158

ADDITIONAL KIT SETTINGS
41
PORTAMENTO (portamento has two options. ALWAYS means the portamento will always
be active, gliding between all notes played. ONLY LEGATO makes the portamento active
only when playing overlapped so called legato notes.
LEGATO TRIG MODES The three parameters at the bottom of the window control which of
the AMP, FILTER and LFO trigs will be active for notes played legato.
•
For a staccato bass sound it is useful for all trigs to be activated, so the sound will
sound the same, even if two notes are played overlapped by mistake. But for a
lead sound it might be better to not initiate any trigs for notes played legato.
MULTI TRIG
The Multi Trig is a link between the synthesis and the sequencer of the Monomachine.
Using the keyboard MULTI TRIG mode on the SFX-6, or the Multi Trig MIDI channel (see
"MULTI TRIG" on page 90 for more information) you can make advanced monophonic
arrangements. All tracks can unite their efforts in creating one dynamic sound, and the
sequencer can be part of the arrangement.
1.
Press the [KIT] key and navigate to the MULTI trig icon using the [ARROW] keys.
2.
Press [ENTER/YES] to enter the MULTI TRIG window. Navigate between the available
selections using the [UP] and [DOWN] keys.
In the MULTI TRIG window you will find one main tab named “MULTI MODE” with four
options. To the right there is room for an additional context tab with extra settings for some
selections of the first tab. Navigate between the tabs, and inside the context tab (when
available) using the
[LEFT] and [RIGHT] keys. Use the [UP] and [DOWN] keys to adjust
the parameter values. Selections in the MULTI MODE tab need to be confirmed with the
[ENTER/YES] key, whereas the selections in the context tab are effecting immediately.