Monomachine SFX-6 User Manual Download | Manualshive

Page: 16 / 158

background image

USER INTERFACE AND CONNECTORS

8

6.

Main/Individual Audio Outputs B/A

7.

Stereo Headphone Outputs (Amplified copy of output AB)

ADDITIONAL REAR CONNECTORS, SFX-6

1.

AC 115/230V 50/60Hz Input with integrated fuse holder and spare fuse storage.

•

Caution! Although the Monomachine SFX-6 can accept both 115 and 230 Volts
main current, both the voltage selector and the fuse need to be matched to the
voltage. The fuse holder has two sections. The inner is the one currently in use.
For 115V operation the fuse should be specified as 250mA, 125V. For 230V opera-
tion the fuse should be specified as 125mA, 250V.

2.

Power On/Off switch.

3.

Voltage selector.

•

Caution! If you want to change the voltage for the Monomachine, please take
notice of the warning found in the first point of this section.

RACK MOUNT KIT

All Monomachine versions, except the SFX-6, can be rack mounted in a standard 19” rack,
using the Monomachine/Machinedrum rack mount kit which is ordered separately. When
rack mounted, the Monomachine occupies four standard height units plus additional space
needed to accommodate for cables plugged into the unit at the back.

RACK MOUNT KIT ASSEMBLY

Make sure that you use a Philips screwdriver of the right size, and in good condition. Use
the included M3x6mm size screws to secure the rack mount consoles on each side of the
Monomachine. Make sure that all screws are fastened for secure operation of the unit.

CONNECTING THE UNIT

Follow the basic guide below to power up your unit for the first time.

1.

For SFX-6: Insert the supplied power cord in a grounded wall socket, specified as the
voltage selector on the back of your SFX-6.
For MKI/MKII versions: Connect the supplied power supply unit to a wall socket, and
connect the small plug into the rear of the unit.

2.

Connect the Main Audio Out A/B from the Monomachine to your mixer or amplifier, and/
or connect a pair of stereo headphones to the Headphone Output.

3.

If MIDI control is desired, connect the MIDI OUT from the Monomachine to the MIDI IN
of the device you wish to send data to. Connect the MIDI IN of the Monomachine to the
MIDI OUT of device you wish to receive data from. The MIDI THRU port is “echoing” the
data coming in from the MIDI IN port, so it can be used for daisy chaining other MIDI
units.

1

2

3

«
...
14
15
16
17
18
...
»

Summary of Contents for SFX-6































































































































































Reviews:

No comments

Related manuals for SFX-6

Brand: Kawai Pages: 35

Brand: Motas Pages: 62

Brand: Waldorf Pages: 126

Brand: Sequential Pages: 88

Brand: Roland Pages: 10

Brand: Hameg Pages: 64

Brand: Yamaha Pages: 132

Brand: Yamaha Pages: 174

Brand: Casio Pages: 32

Brand: Texas Instruments Pages: 109

Brand: Keysight Technologies Pages: 20

Brand: Medeli Pages: 20

Brand: Moog Pages: 7

Drummer From Another Mother

Brand: Moog Pages: 44

Brand: Moog Pages: 116

Brand: Electron Pages: 9

Brand: Electron Pages: 33

Brand: Analogue Solutions Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands