Checklist
Have a quick check to see that you have each of
the following in your
monitor
box:
If any items are missing please call
0845 071 1007
.
7 Simple Steps
Follow the 7 simple steps to getting started and
you’ll have your
monitor
home protection system
up and running in no time.
The system has been designed for easy
self-installation and all the sensors are
preprogrammed. It normally takes less than an
hour to install the whole system.
Quick Start Guide
• 1 control panel (with phone cable and
power supply transformer connected)
• 2 PIR motion sensors
• 1 smoke detector
• 1 remote control key chain
• Screws and wall plugs for fixing
• 2
monitor
window stickers
• 5 wallet cards for you to give to your
nominated contacts
• User guide and customer information
1. Connect the battery
2. Fit the control panel
3. Install the motion sensors
4. Install the smoke detector
5. Set the clock
6. Register and setup your system online
7. Test the system
version 2.1
Welcome to
monitor
Installing your new 24hr. home protection system is quick and easy. The only tools you’ll
need are an electric drill, a 5mm drill bit and a selection of screwdrivers.
Way better
than a guard
dog.
24hr. wireless intruder & fire alert system
35297 Monitor Quick Start Guide 16/1/07 11:20 Page 1
