Money Controls SCH2, Technical Manual

Page: 31 / 61

SCH2 Technical Manual TSP016.doc Issue 3.0 – January 2005

Money Controls 2005. All rights reserved.
Page 31 of 61
16. Command List
34 commands are supported…
Table 3: Command List.
Header 254 Simple poll
Header 253 Address poll
Header 252 Address clash
Header 251 Address change
Header 250 Address random
Header 247 Request variable set
Header 246 Request manufacturer id
Header 245 Request equipment category id
Header 244 Request product code
Header 242 Request serial number
Header 241 Request software revision
Header 236 Read opto states
Header 219 Enter new PIN number
Header 218 Enter PIN number
Header 217 Request payout high / low status
Header 216 Request data storage availability
Header 215 Read data block
Header 214 Write data block
Header 192 Request build code
Header 172 Emergency stop
Header 171 Request hopper coin
Header 169 Request address mode
Header 168 Request hopper dispense count
Header 167 Dispense hopper coins
Header 166 Request hopper status
Header 165 Modify variable set
Header 164 Enable hopper
Header 163 Test hopper
Header 161 Pump RNG
Header 160 Request cipher key
Header 004 Request comms revision
Header 003 Clear comms status variables
Header 002 Request comms status variables
Header 001 Reset device