2. Features and Procedures
Customer Copy
Determines whether to print a Cardholder copy of the receipt along with the Merchant copy.
None
- no Cardholder copy prints
Confirm
- "Prt Cust Cpy" prompts for confirmation to print Customer copy (
YES
/
NO
)
Automatic
- automatically prints the Cardholder copy (default)
Note: For debit transactions, if you set the Customer Copy parameter to “None”, only
the Merchant copy of the receipt initially prints. But if you perform a reprint
receipt, the Cardholder copy is printed.
Note: On signatureless transactions, the Cardholder copy may or may not be printed
depending on the card being used and how your terminal is configured.
Reprnt Merch Copy
Determines whether a Merchant copy of the receipt is printed in addition to the Cardholder copy when
None
- only the Cardholder copy prints (default)
Confirm
- "Reprint Last Merchant Cpy" prompts for confirmation to reprint the Merchant copy (
YES
/
NO
)
Automatic
(both the Merchant copy and the Cardholder copy will print)
, only the Cardholder copy is printed when
regardless of the Reprnt Merch Copy setting.
Prmpt Beep Delay
Number of seconds to wait after beeping and displaying the "Tear Receipt; Press OK key" message before
printing the customer receipt.
Key in number of seconds and press the green
OK
key.
Default =
120
seconds.
Enable Printer
Enables/disables the printer.
On
(default)
Off
Note: Selecting Off results in the "printer disabled" message any time a report should be
printed or "Printer Error" any time a financial transaction is attempted).
Large Amt Print
Determines whether to print double-wide characters for amount lines, the Sequence number and the Original
Auth #.
On
(default)
Off
Moneris Vx810 Duet Operating Manual
19
