Moneris transelect v2000 Operating Manual Download Page 17 | Manualshive

Page: 17 / 106

background image

Moneris TRANSELECT (V2000) Merchant Operating Manual v.1.1

9

CHAPTER 2: Terminal Features and Procedures

nesses. This feature is activated while configuring your terminal. Refer to
8.5: Configuring Your Terminal (ADMIN 08) on page 68.

2.2.4: Purchasing Card

If this feature is activated and programmed in your terminal, the Customer
Reference Number (if keyed) will be printed on every Purchasing Card
Receipt. The terminal will prompt for tax amount, if you do not wish to key
in the amount of tax key in 0 when prompted. This feature is activated
while configuring your terminal. Refer to 8.5: Configuring Your Terminal
(ADMIN 08) on page 68.

2.2.5: Reprint Transaction

To reprint the last transaction after the terminal has returned to the
"READY" prompt, press SHIFT (

T

) key and then the RETRY key. The

word *DUPLICATE* will be printed on the top and bottom lines of the
Receipt.

You can also print a duplicate of the last financial transaction by pressing
ENTER on the terminal prior to pressing the CANCEL/EXIT key.

Note:

The card number is masked on reprinted receipts.

2.2.6: Third Party Card Processing

This feature enables you to process Third Party transactions (e.g. JCB).
Contact your Moneris Solutions Sales Representative for further details.
Third Party processing parameters are keyed in ADMIN 10 and ADMIN
11; refer to CHAPTER 8: Processing Administrative Functions for using
administrative functions.

2.2.7: Tip Processing

This feature enables you to customize your terminal to process tip amount
on all card purchase (Credit, Debit, Third Party cards) transactions tradi-
tionally used in restaurant environments. You must have a PINSmart PIN-
Pad to enable your terminal process tip on Debit card transactions. The
feature is enabled while configuring your terminal. Refer to Section 8.5:
Configuring Your Terminal (ADMIN 08) on page 68.

2.2.8: Clerk Subtotalling

This feature provides you with the option of obtaining Subtotals of an indi-
vidual or group of employees on one or more terminals. This feature is acti-
vated using ADMIN functions 81, 82, 83 and 84; refer to CHAPTER 8:
Processing Administrative Functions.

«
...
15
16
17
18
19
...
»

Summary of Contents for transelect v2000











































































































Reviews:

No comments

Related manuals for transelect v2000

Brand: NCR Pages: 153

Brand: NCR Pages: 44

Brand: NCR Pages: 112

Brand: NCR Pages: 92

Brand: Omni Pages: 2

Brand: BEAMEX Pages: 36

Brand: ELTEX Pages: 80

Brand: HYOSUNG Pages: 30

Brand: FAMOCO Pages: 17

Brand: WiPath Pages: 38

Multitron GS-44

Brand: GinSan Pages: 2

Brand: Shenzhen Tozed Technologies Pages: 12

GUARDSCAN GS120

Brand: GIGA-TMS Pages: 24

Brand: CommScope Pages: 11

Brand: Eurotherm Pages: 8

Brand: Ubiquiti Pages: 24

Brand: NCR Pages: 36

Brand: EBN Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands